TYB602F Switching / louver module 2x / 1x / 6A
Type: HAGER TYB602F 2x / 6A, 2x switching / 1x louver actuator
Bus System: KNX
Max. Switching capacity at: 230 V AC
Switching current at cos = 0.8: max. 6 A
Degree of protection: IP20
Mounting: Recessed
Recessed switching actuator with integrated bus coupler for switching 2 sockets or light outputs or 1 blinds / shutters. You can choose between ON / OFF, timer, safety shutdown, forced control, deactivation, logic, preset, delay functions or 64 scenes to control the light outputs. With toggle function for time or permanent function. The UP / DOWN / stop command and the slat angle can be set using the blind function. Percentage control of the blind for moving a predefined position. The sun protection function can be used in conjunction with an external sensor to control the brightness of the room. With alarm function to control the blind in a defined position. Safe exit as long as the button remains pressed. 64 scene features per channel. Logic block for output control depending on the result of the logical connection. Preset, lock function, priority control. The device converts the bus information into the corresponding commands. The outputs are switched via the system line from their assigned inputs. Manual operation as well as LED switching status display and operating hours counter for output. The device can be read using a diagnostic tool. With programming button and red programming LED, bus connection pre-assembled with cable and bus terminal.
- test mode / site can be activated using the programming key
- with positioning function for blind and slat position, with safety functions e.g. for wind, rain, alarm, with sun protection function
- to control the AC drive
- switching time when changing direction is adjustable
- for 1 phase operation
- follow the manufacturer's instructions!
230 V LED bulbs: 5 x 13 W
Energy saving bulbs: 5 x 13W
230 V bulbs and halogen bulbs: 500 W
Conventional transformers: 500 VA
Electronic transformers: 500 W
Uncompensated fluorescent lamps: 500 VA
Fluorescent lamps with electronic ballast: 6 x 48 W.
Estimated delivery time: 6 - 10 days
