{"product_id":"creatrol-mini-pir-dali-std-20-senzor-pohybu","title":"Mini-PIR-DALI\/STD\/20 DALI Bus Access PIR motion sensor 20°","description":"\u003cp\u003e\u003cstrong\u003eCreatrol Mini-PIR-DALI\/STD\/20\u003c\/strong\u003e is a miniature ceiling-mounted motion sensor with a narrow detection area for DALI systems. It uses \u003cstrong\u003epassive infrared PIR technology\u003c\/strong\u003e and a Fresnel lens to detect human movement within a defined part of the space. The narrow curtain-shaped coverage allows monitoring of an entrance, passage or section of a corridor without covering the entire room.\u003c\/p\u003e\n\u003cp\u003eThis is the \u003cstrong\u003eDALI Bus Access \/ STD\u003c\/strong\u003e version, powered directly from the DALI bus at 9–22 V DC. The sensor combines motion detection with measurement of ambient illuminance over a range of 0–32 000 lx. The measured data serve as inputs to a compatible DALI control system, which provides the required lighting logic. Support for this sensor in the selected DALI controller must be verified during system planning. These functions allow lighting automation to take movement and available daylight into account. The small body with a Ø 35 mm cutout is suitable for residential and commercial interiors requiring discreet installation.\u003c\/p\u003e\n\u003ch3\u003eNarrow detection area for entrances and passages\u003c\/h3\u003e\n\u003cp\u003eThe detection angle is 20° in the narrow direction. When mounted on the ceiling at a height of 3 m, it creates an area up to 6 m long and approximately 0.9 m wide. The sensor can therefore be aligned with a specific passage, entrance line or narrow section of a walkway. Correct alignment of the detection area using the orientation mark on the sensor is important during planning.\u003c\/p\u003e\n\u003cp\u003ePIR detection responds to movement within the sensing area. The sensor is particularly suitable for people passing through a defined space; detecting people sitting quietly requires a suitable technology for stationary presence detection.\u003c\/p\u003e\n\u003ch3\u003eFunctions and configuration\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMotion detection using a PIR sensor with narrow coverage.\u003c\/li\u003e\n\u003cli\u003eDALI communication according to IEC 62386-103.\u003c\/li\u003e\n\u003cli\u003eIntegrated illuminance measurement from 0–32 000 lx.\u003c\/li\u003e\n\u003cli\u003eAdjustable light threshold.\u003c\/li\u003e\n\u003cli\u003eAdjustable delay from 1 to 3 600 seconds.\u003c\/li\u003e\n\u003cli\u003eConfiguration using DALI-Config software or an optional IR remote control.\u003c\/li\u003e\n\u003cli\u003eStatus readout and configuration of supported parameters using the IR remote control.\u003c\/li\u003e\n\u003cli\u003eThe indicator LED brightness automatically adapts to ambient light.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eCommunication:\u003c\/strong\u003e DALI, IEC 62386-103\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eVersion:\u003c\/strong\u003e Bus Access \/ STD\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDetection technology:\u003c\/strong\u003e Passive infrared PIR sensor\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePower supply:\u003c\/strong\u003e 9–22 V DC from the DALI bus\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePower consumption:\u003c\/strong\u003e Max. 0.5 W\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAddress range:\u003c\/strong\u003e 00–63 (decimal)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMounting:\u003c\/strong\u003e Recessed ceiling mounting\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMounting height:\u003c\/strong\u003e 2–3.2 m\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDetection angle:\u003c\/strong\u003e Narrow 20° coverage\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDetection area at a height of 3 m:\u003c\/strong\u003e Length up to 6 m, width approximately 0.9 m\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eIlluminance measurement:\u003c\/strong\u003e 0–32 000 lx; accuracy ±4 %\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAdjustable delay:\u003c\/strong\u003e 1–3 600 s\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eIndication:\u003c\/strong\u003e LED with automatic brightness adjustment\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e Ø 43 × 25 mm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCutout diameter:\u003c\/strong\u003e Ø 35 mm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSensor weight:\u003c\/strong\u003e 14.5 g\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eConnecting cable:\u003c\/strong\u003e UL1007 22 AWG, length 150 mm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHousing material:\u003c\/strong\u003e PC\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eIP rating:\u003c\/strong\u003e IP20\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOperating temperature:\u003c\/strong\u003e −20 to +45 °C, indoor use\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eRelative humidity:\u003c\/strong\u003e \u0026lt; 95 %, non-condensing\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eStorage temperature:\u003c\/strong\u003e −40 to +85 °C\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eMounting and positioning\u003c\/h3\u003e\n\u003cp\u003eThe sensor is designed for recessed ceiling mounting at a height of 2–3.2 m. The body has an outer diameter of 43 mm and a depth of 25 mm, and the required cutout diameter is 35 mm. Spring clips secure it within the cutout. Optional adapters extend the options to surface or wall mounting.\u003c\/p\u003e\n\u003cp\u003eThe mounting surface must be stable and free of vibration. Do not position the sensor near heat sources, air-conditioning outlets or areas subject to rapid temperature changes. Pets or curtains moving within the detection area may cause an unwanted response. DALI communication and power use the same bus connection, wired according to the diagram in the datasheet.\u003c\/p\u003e\n\u003ch3\u003eColour variants\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhite:\u003c\/strong\u003e 60.99.1215 \/ CTL-SEN-Mini\/1215.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlack:\u003c\/strong\u003e 60.9B.1215 \/ CTL-SEN-Mini\/1215B.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eOptional accessories\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRC1 – IR remote control, 60.99.00C1.\u003c\/li\u003e\n\u003cli\u003eCover ring, 60.99.0A55.\u003c\/li\u003e\n\u003cli\u003eType 86 wall mounting frame, 60.99.0A86.\u003c\/li\u003e\n\u003cli\u003eTrimless recessed mounting adapter, 60.99.0A40.\u003c\/li\u003e\n\u003cli\u003eSurface mounting base, 60.99.0A50.\u003c\/li\u003e\n\u003cli\u003eUniversal mounting bracket.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAccessories are selected separately according to the required mounting and configuration method.\u003c\/p\u003e\n\u003ch3\u003eDocumentation\u003c\/h3\u003e\u003cp\u003e\u003ca href=\"https:\/\/file.creatrol.cn\/C60991215SPEN.pdf\" target=\"_blank\" rel=\"noopener\"\u003eMini-PIR-DALI\/STD\/20 datasheet (PDF, EN)\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.creatrolsensor.com\/products\/60991215\" style=\"color: #ff2a00;\" target=\"_blank\" rel=\"noopener\"\u003eManufacturer information\u003c\/a\u003e\u003c\/p\u003e","brand":"Creatrol","offers":[{"title":"White","offer_id":60556492013913,"sku":"60.99.1215","price":116.0,"currency_code":"EUR","in_stock":true},{"title":"Black","offer_id":60556523831641,"sku":"60.9B.1215","price":116.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0607\/5970\/3779\/files\/creatrol-60991215-biely.webp?v=1795012774","url":"https:\/\/www.knxsolution.sk\/en\/products\/creatrol-mini-pir-dali-std-20-motion-sensor","provider":"KNXSolution","version":"1.0","type":"link"}