4940210 RM 4 I KNX Switching actuator 4x/16A for C loads

Type: Theben 4940210 RM 4 I KNX Switching actuator 4x/16A for C loads

EAN: 4003468490297

Bus System: KNX (TP)

Degree of protection: IP20

Mounting: DIN rail

4-fold switching actuator FIX1, load switching C. With current detection. For higher lamp loads. LED display of switching status for each channel. Manual control on the device (even without a bus connection). Adjustable characteristics: e.g. switching, delayed switching, pulse function. Connections, contact type (NC contact/NO contact) and participation in central commands such as continuous on, continuous off, central switching and scene save/recall. Switching functions: on/off, pulse, on/off delay, stair light with notification. Logical links: e.g. lock, AND, release, OR.

KNX operating voltage: Bus voltage ≤4 mA
Operating voltage: 110-240 V AC 50-60 Hz
Consumption in standby mode: ~1.3 W
Width: 4 modules
Max. Cable cross-section: Solid wire: 0.5 mm² (Ø 0.8) to 6 mm² | Wire with end: 0.5 mm² to 4 mm²
Number of channels: 4
Contact type: NO contact, 16 A, 10 A
Opening width: < 3 mm
Resistive load: 3680W
Capacitive load: 200 µF
Bulb/halogen lamp power: 2600 W
Fluorescent Lamp Load (Typical) Parallel Corrected: 2000 W (200 µF)
Fluorescent lamp load (electronic ballast): 1650 W
Energy-saving fluorescent lamps: 410W
LED lamp < 2 W: 75 W
LED lamp 2-8 W: 850 W
LED lamp > 8 W: 850 W
Inrush current: max. 1500 A / 200 µs
Output voltage: 240 V AC
Switching output: Potential-free
Possible switching of different phases
Suitable for SELV: Yes, if all channels switch to SELV
Current measurement accuracy: I > 1 A: ± 8% of the measured value; I < 1 A: ± 100 mA; lowest measurable value: 150 mA
C load: Yes
Ambient temperature: -5°C ... 45°C
Type of protection: IP20

Link to manufacturer information