Motion sensor 219410 KNX Cube 240
Type: Motion sensor 219410 KNX Cube 240 - anthracite
EAN: 4010337056379
- The PIR motion detector consists of three passive infrared (PIR) motion detectors with an integrated brightness sensor, an integrated IR receiver and an integrated red light emitting diode (LED) to display the detected motion in test mode.
- Two independent light outputs.
- Light output: configurable switching, dimming value transmitter or light scene extension. Operating mode fully automatic (automatic on or off) or semi-automatic (manual on, automatic off). It is possible to activate an adjustable deceleration time or a dynamic deceleration time. day night switching.
- Sensor sensitivity can be parameterized.
- Send brightness values cyclically or when changing.
- Presence output independent of brightness. It is possible to configure the switch-on delay and the deceleration time. The current status can be sent cyclically depending on the status.
- Absence output independent of brightness. It is possible to configure the switch-on delay and the deceleration time. In this case, the deceleration time elapses as soon as someone enters the detection area. The current status can be sent cyclically depending on the status.
- Manual control with IR remote control.
KNX media: TP1-256
Detection angle: 240 degrees
Mounting height 2.50 m:
- Scanning range forward, max .: cca 16 m
- Reach on each side, max .: cca 16 m
Brightness value: 2 to 1000 lx
Degree of protection: IP54
Ambient temperature: -25 to +55 degrees Celsius
Tips:
- Suitable for indoor and outdoor ceiling and wall mounting.
- Optional: Remote control via IR remote control KNX.
Estimated delivery time: 6 - 10 days
