Save 0%
Save %
KNX EIB cable YCYM 2x2x0.8 - 100m Thanks to the increased test voltage and marking, this cable is particularly suitable for transmitting bus signal...
View full details
Save 0%
Save %
Cable KNX EIB YCYM 2x2x0.8 - 250m Thanks to the increased test voltage and marking, this cable is particularly suitable for transmitting bus signal...
View full details
Save 0%
Save %
KNX EIB HCHM cable 2x2x0.8 - 100m - halogen-free Thanks to the increased test voltage and marking, this cable is particularly suitable for transmit...
View full details
Save up to 16%
Save %
Type: HELIH 106010.0 KNX RF Handle for security and automationHELIH KNX is a highly innovative and intelligent security and automation radio window...
View full details
Save 0%
Save %
WAGO 243-2112-pole plug-in terminal (red / black) for KNX / EIB connection- fits the modules of most manufacturers, such as ABB, Busch-Jaeger, Gira...
View full details
Save 0%
Save %
WAGO 243-212 2-pole plug-in terminal (gray/yellow) - fits into modules from most manufacturers such as ABB, Busch-Jaeger, Gira, Zennio, MDT, Weinzi...
View full details
Save 0%
Save %
Type: Zennio ZS55 Cable outlet - rear part 8300020 + middle part 8300021XX + frame 9800001XXLow profile: the frame protrudes 9.5 mm from the wall.▪...
View full details
Save up to 0%
Save %
Overcurrent protection rated at a maximum of 16 A is recommended. This accessory can be cut with a common cutting tool. It is recommended to remove...
View full details
Save 0%
Save %
Type: Elsner 30234 Set of power connectors ST - STAK3, STAS3, STASI Link to manufacturer information
Save 0%
Save %
Elsner 20401 SF-ST interference suppression filter for motors The SF-ST interference suppression filter reduces electromagnetic interference pulses...
View full details
Save 0%
Save %
Type: Elsner 30530 Air Vision - CO2 indicator for air quality with sensorAir Vision displays the indoor CO2 concentration using a system of indicat...
View full details
Save 0%
Save %
Fix P 30129 Pole mount for Elsner weather stations and sensors - P03/P04, Suntracer, Vari, Windancer. With the Fix P mast mount, weather stations a...
View full details
Save 0%
Save %
Elsner 30119 Mounting Arm Flex S. Arm for mounting Elsner weather stations on the wall. Total length approximately 64 mm. The following weather st...
View full details
Save 0%
Save %
Elsner 30120 Flex Mounting Arm S+ Arm for mounting Elsner weather stations on the wall. Total length approx. 116 mm. The following weather station...
View full details
Save 0%
Save %
Elsner 30115 Flex Mounting Arm L - 1 joint Arm for mounting Elsner weather stations on the wall. Total length approx. 215 mm. The following weathe...
View full details
Save 0%
Save %
Elsner 30116 Flex Mounting Arm L+ - 2 joints Arm for mounting Elsner weather stations on the wall. Total length approx. 267 mm. The following weat...
View full details
Save up to 0%
Save %
DoorBird IP access control device A1121 surface mount, Wifi - 56 versions Multi-technology access control system and stand-alone solution for rear ...
View full details
Save up to 0%
Save %
DoorBird IP access control device A1121 for flush mounting, Wifi - 56 versions Multi-technology access control system and stand-alone solution for ...
View full details
Save up to 0%
Save %
DoorBird IP access control device A1122 surface mount, Wifi - 56 versions Multi-technology access control system and stand-alone solution for rear ...
View full details
Save up to 0%
Save %
DoorBird IP access control device A1122 for flush mounting, Wifi - 56 versions Multi-technology access control system and stand-alone solution for ...
View full details
Save up to 0%
Save %
Westerstrand KNX wall clock Ø 230–400 mm without a second hand is an indoor analogue clock for displaying a consistent time throughout a KNX instal...
View full details
Save up to 0%
Save %
Westerstrand KNX wall clock Ø 230–400 mm with a sweeping second hand is an indoor analogue clock for displaying a consistent time throughout a KNX ...
View full details
Save 0%
Save %
Type: IPM/S1.1 Patch ModuleEAN: 4016779697903ID: 2CDG120036R0011Degree of protection: IP20Mounting: DIN rail The IP Patch Module consists of an RJ-...
View full details
Save 0%
Save %
The Bobcat PoE adapter supplies data and power to the wall panel through a single Ethernet cable. The Displine converter is designed for flush moun...
View full details