Accessories

Type: Zennio ZS55 Cable outlet - rear part 8300020 + middle part 8300021XX + frame 9800001XXLow profile: the frame protrudes 9.5 mm from the wall.▪...

It is recommended to secure max. 16A. This accessory can be cut with a common cutting tool. It is recommended to remove the copper sheet to make a ...

Type: Elsner 30234 Set of power connectors ST - STAK3, STAS3, STASI Link to manufacturer information

Type: Elsner 30530 Air Vision - CO2 indicator for air quality with sensorAir Vision displays the indoor CO2 concentration using a system of indicat...

ABB IS/S8.1.1 IP Switch, 8 Ports (100 Mbit/s) EAN: 4053546045512 ID: 2CDG120082R0011 Degree of protection: IP20 The IP Switch is an 8-port, unmanag...

ABB ISP/S8.1.1.1 Switch PoE, 8 Ports (100 Mbit/s) EAN: 4053546045529 ID: 2CDG120083R0011 Degree of protection: IP20 The IP Switch PoE is an industr...

Type: IPM/S1.1 Patch ModuleEAN: 4016779697903ID: 2CDG120036R0011Degree of protection: IP20Mounting: DIN rail The IP Patch Module consists of an RJ-...

KNX EIB cable YCYM 2x2x0.8 - 100m Thanks to the increased test voltage and marking, this cable is particularly suitable for transmitting bus signal...

Cable KNX EIB YCYM 2x2x0,8 - 250m Thanks to the increased test voltage and marking, this cable is particularly suitable for transmitting bus signal...

KNX EIB HCHM cable 2x2x0.8 - 100m - halogen-free Thanks to the increased test voltage and marking, this cable is particularly suitable for transmit...

Fix P 30129 Pole mount for Elsner weather stations and sensors - P03/P04, Suntracer, Vari, Windancer. With the Fix P mast mount, weather stations a...

Elsner 30119 Mounting Arm Flex S. Arm for mounting Elsner weather stations on the wall. Total length approximately 64 mm.  The following weather st...

Elsner 30120 Flex Mounting Arm S+ Arm for mounting Elsner weather stations on the wall. Total length approx. 116 mm.  The following weather station...

Elsner 30115 Flex Mounting Arm L - 1 joint Arm for mounting Elsner weather stations on the wall. Total length approx. 215 mm.  The following weathe...

Elsner 30116 Flex Mounting Arm L+ - 2 joints Arm for mounting Elsner weather stations on the wall. Total length approx. 267 mm.  The following weat...

WAGO 243-2112-pole plug-in terminal (red / black) for KNX / EIB connection- fits the modules of most manufacturers, such as ABB, Busch-Jaeger, Gira...

WAGO 243-212 2-pole plug-in terminal (gray/yellow) - fits into modules from most manufacturers such as ABB, Busch-Jaeger, Gira, Zennio, MDT, Weinzi...

DoorBird IP access control device A1121 surface mount, Wifi - 56 versions Multi-technology access control system and stand-alone solution for rear ...

DoorBird IP access control device A1121 for flush mounting, Wifi - 56 versions Multi-technology access control system and stand-alone solution for ...

DoorBird IP access control device A1122 surface mount, Wifi - 56 versions Multi-technology access control system and stand-alone solution for rear ...

DoorBird IP access control device A1122 for flush mounting, Wifi - 56 versions Multi-technology access control system and stand-alone solution for ...

Elsner 20401 Interference suppression filter for SF-ST motors The SF-ST interference suppression filter reduces electromagnetic interference pulses...

Type: US /E1 Connection terminal with surge protectionEAN: 4016779005708ID: GHQ6310009R0001Bus System: KNX (TP)Mounting: Built-in installationBus c...

Type: DEHN 925 001 Surge arrester for KNX / EIB EAN: 4013364047365 Bus System: KNX (TP) Mounting: Built-in installation Surge arrester that is adap...

Type: DEHN 920 300 BXT BAS base for surge arresters BXT ML2 BD S 24 or BXT ML4 B 180 EAN: 4013364109179 Mounting: DIN rail Four-pole, universal pas...

Type: DEHN 920 310 Surge arrester KNX-Bus BXT ML4 B 180 (4 cores) EAN: 4013364109124 Assembly: must be purchased together with the base BXT BAS (no...

Type: DEHN 920 244 Surge arrester BXT ML2 BD S 24 DALI-Bus/ with Life Check EAN: 4013364117792 Assembly: must be purchased together with the base B...

Type: DEHN Surge arrester 952070 DEHNguard modular DG S 275 - type 2EAN/GTIN: 4013364108493Voltage protection level (UP ) ≤ 1.5 kV.Voltage protecti...

Type: DEHN Surge arrester 952400 DEHNguard modular DG M TNS 275 - type 2+3EAN/GTIN: 4013364108455SPD according to EN 61643-11 / IEC 61643-11 type 2...

Type: ABB SSF/GB Siren in aluminum protective cover with additional protective layer and flashing light attached. Tamper protected with case tamper...

ABB Indoor siren SSS, 12V DC EAN: 4013232023200 ID: GHV9270001V0001 Electronic solid-state siren with intermittent tone for alarm purposes in indoo...

Type: ABB VMRS/W Set of reed contacts - white EAN: 4016779506588ID: GHQ3201972R0011 20 pieces of magnetic reed contact MRS/B. To monitor the openin...

Type: ABB WRK/W Switching contact with connection cable EAN: 4016779664042ID: 2CDG250003R0011 Degree of protection: IP68 Installation: installation...

Type: Schneider Electric MTN6940-0000 SpaceLogic KNX connection moduleEAN: 3606481817006SpaceLogic KNX Module Link connects Master and Extension/Sl...

Type: Schneider Electric MTN6941-0001 SpaceLogic KNX connection cableEAN: 36064818170133SpaceLogic KNX Cable Link S connects Master and Extension/S...

Type: KS/K 4.1EAN: 4016779517256ID: GHQ6301910R0001 For connecting sealed lead-acid batteries SAK7, SAK12 and SAK17 to the EIB SU / S uninterruptib...

Type: AM/S12.1 Battery module, 12 V DC, MDRCEAN: 4016779514811ID: GHQ6310062R0111Degree of protection: IP20Mounting: DIN rail Sealed lead-acid batt...

Type: MTN668991 Merten KNX - rechargeable battery - 12 VDC 18 Ah - lead-gel EAN: 4042811050214 Rated voltage: DC 12V Capacity: 18 Ah Ambient air te...

Type: MTN668990 Merten KNX - rechargeable battery - 12 VDC 7.2 Ah - lead-gel EAN: 4011281695850 Rated voltage: DC 12V Capacity: 7.2 Ah Ambient air ...

Type: B.E.G. IR-PD-KNX Infrared remote control 92123EAN: 4007529921232Infrared remote control for convenient setting or changing parameters.Suitabl...

Type: GIRA 209800 Wall bracket for HomeServer 4.For easy wall mounting. EAN: 4010337884613

Mounting bracket, 200.002, Hugo Müller, item no. 24082

Mounting plate for wall box, 200.001, Hugo Müller, product no. 24080.

Busch-Jaeger Corner adapter Busch-Watchdog PRO 6851/EA-xxx For detection on two sides of the house, in combination with Busch Watchdog PRO 280.It i...

Busch-Jaeger Design frame Busch-Watchdog PRO 6851/DR-xxx Design frame for square and cubic design. For combination with devices of the series Busch...

ZENNIO ZS55 - Frames 55 x 55 mm frames for flush mounting of switches and sockets of the ZS55, Flat 55 and Tecla 55 series are available in various...

ZENNIO ZS70 - Frames Frames 70 x 70 mm for flush mounting of switches and sockets of the ZS70, Flat 70, Tecla 70 and Z28 series. 1/2/3/4-fold The c...