DALI

The room module connects DALI to KNX TP and supports configuration and control via Bluetooth using the DALI Cockpit Mobile app. The KNX interface i...

The Lunatone DALI-2 Display 4″ is a wall-mounted touchscreen for one line with up to 64 DALI addresses. Controls for individual luminaires, groups ...

The Lunatone DALI-2 Display 7″ is a wall-mounted touchscreen for one line with up to 64 DALI addresses. Controls for individual luminaires, groups ...

The touch panel is used to manage and monitor DALI DT1 emergency luminaires. It can schedule communication, function and duration tests, monitor fa...

The control module uses a real-time clock to run scheduled sequences of DALI commands. It supports up to 32 schedule entries and a total of 200 com...

The single-channel module converts an analogue control voltage into a DALI brightness command. For example, an existing controller with a 0–10 V ou...

The module converts a 4–20 mA current signal into a brightness level for DALI luminaires. It can connect an industrial controller to the lighting s...

The converter controls a luminaire with two existing DALI DT6 drivers as one tunable white device. It occupies one DT8 Tc address on the input line...

The module controls two DALI output channels from one DT6 address, with an individually adjustable curve for each channel. The light can gradually ...

The central interface between the LAN and four DALI lines can control up to 256 drivers. The PS-NR version combines integrated bus power supplies w...

Serial interface for bidirectional communication between a PC or PLC and the DALI bus. It supports addressing, configuration, monitoring and readin...

The interface plays internet radio or audio files and allows station selection and volume control via DALI commands. Up to 16 radio stations can be...

The module controls a blind motor with separate conductors for up and down movement. It uses one DALI address to set the blind position and store p...

The sensor detects motion and measures light intensity, temperature, relative humidity and air pressure for a central control system. The AQ versio...

Compact module for four potential-free push-buttons or switches. Each input can be assigned its own DALI commands and destination addresses. The ap...

An existing presence detector, motion sensor or other device with a suitable switching contact can be used in a DALI system. The module uses change...

The Lunatone DALI-2 SI1L PRO processes a switched 230 V AC signal from a motion or presence detector and controls DALI lighting according to the co...

The DIN rail module has four programmable mains switching inputs and four local rotary controls with push-button function. Brightness can be adjust...

The module controls the brightness of DALI lighting using a 100 kΩ potentiometer. It also has an input for a potential-free push-button. The destin...

The battery-powered Lunatone wDALI MC connects up to four conventional volt-free push-buttons to DALI lighting without running a bus cable to the s...

The Lunatone DALI Touchpanel is a wall controller with a replaceable printed insert. From the same position you can recall four lighting scenes or ...

The Lunatone DALI-2 Touchpanel 03 is a wall controller with a glass touch surface. The printed layout determines which controls are immediately ava...

The Lunatone DALI-2 Touchpanel 04 is a wall controller with a glass touch surface. The printed layout determines which controls are immediately ava...

The Lunatone DALI-2 ROT Touch wall controller combines a rotary pushbutton with 3 capacitive keys. Tap a key to select an area or function, then tu...