DALI

The room module connects DALI to KNX TP and supports configuration and control via Bluetooth using the DALI Cockpit Mobile app. The KNX interface i...

The Lunatone DALI-2 Display 4″ is a wall-mounted touchscreen for one line with up to 64 DALI addresses. Controls for individual luminaires, groups ...

The Lunatone DALI-2 Display 7″ is a wall-mounted touchscreen for one line with up to 64 DALI addresses. Controls for individual luminaires, groups ...

The touch panel is used to manage and monitor DALI DT1 emergency luminaires. It can schedule communication, function and duration tests, monitor fa...

The control module uses a real-time clock to run scheduled sequences of DALI commands. It supports up to 32 schedule entries and a total of 200 com...

The single-channel module converts an analogue control voltage into a DALI brightness command. For example, an existing controller with a 0–10 V ou...

The module converts a 4–20 mA current signal into a brightness level for DALI luminaires. It can connect an industrial controller to the lighting s...

The converter controls a luminaire with two existing DALI DT6 drivers as one tunable white device. It occupies one DT8 Tc address on the input line...

The module controls two DALI output channels from one DT6 address, with an individually adjustable curve for each channel. The light can gradually ...

The central interface between the LAN and four DALI lines can control up to 256 drivers. The PS-NR version combines integrated bus power supplies w...

Serial interface for bidirectional communication between a PC or PLC and the DALI bus. It supports addressing, configuration, monitoring and readin...

The interface plays internet radio or audio files and allows station selection and volume control via DALI commands. Up to 16 radio stations can be...

The module controls a blind motor with separate conductors for up and down movement. It uses one DALI address to set the blind position and store p...

The sensor detects motion and measures light intensity, temperature, relative humidity and air pressure for a central control system. The AQ versio...

Compact module for four potential-free push-buttons or switches. Each input can be assigned its own DALI commands and destination addresses. The ap...

An existing presence detector, motion sensor or other device with a suitable switching contact can be used in a DALI system. The module uses change...

The Lunatone DALI-2 SI1L PRO processes a switched 230 V AC signal from a motion or presence detector and controls DALI lighting according to the co...

The DIN rail module has four programmable mains switching inputs and four local rotary controls with push-button function. Brightness can be adjust...

The module controls the brightness of DALI lighting using a 100 kΩ potentiometer. It also has an input for a potential-free push-button. The destin...

The battery-powered Lunatone wDALI MC connects up to four conventional volt-free push-buttons to DALI lighting without running a bus cable to the s...

The Lunatone DALI Touchpanel is a wall controller with a replaceable printed insert. From the same position you can recall four lighting scenes or ...

The Lunatone DALI-2 Touchpanel 03 is a wall controller with a glass touch surface. The printed layout determines which controls are immediately ava...

The Lunatone DALI-2 Touchpanel 04 is a wall controller with a glass touch surface. The printed layout determines which controls are immediately ava...

The Lunatone DALI-2 ROT Touch wall controller combines a rotary pushbutton with 3 capacitive keys. Tap a key to select an area or function, then tu...

The Lunatone DALI-2 ROT Touch wall controller combines a rotary pushbutton with 5 capacitive keys. Tap a key to select an area or function, then tu...

The Lunatone DALI Switch Cross is a wall controller with four individually programmable push-buttons arranged in a cross. Its factory settings allo...

The Lunatone DALI-2 Switch Cross is a wall controller with four programmable push-buttons arranged in a cross. In direct control mode, each button ...

This battery-powered wall controller operates lighting without running a DALI cable to the switch. Each of the four buttons can be assigned a desti...

The receiver connects wireless wDALI controls to a wired DALI line. A switch can be installed where there is no bus cable: it transmits over a 2.4 ...

The receiver connects compatible Bluetooth 5 controls to a DALI line. It supports switching, dimming and scene recall, as well as colour and white ...

GR transmitterThe modules connect remote DALI loads to the main DALI line by radio. Each link requires at least one transmitter and one receiver. T...

GR receiverThe modules connect remote DALI loads to the main DALI line by radio. Each link requires at least one transmitter and one receiver. The ...

Module for wirelessly connecting physically separate DALI sections. It supports addressed commands, group commands, broadcasts and device queries f...

The portable remote operates DALI lighting through its receiver using four programmable buttons. The buttons can be assigned a destination address,...

Interface for communication between PC programs and modules in the DALI lighting system - standard version EAN: 9010342010125 DALI USB is a PC-USB ...

The interface connects a computer running DALI Cockpit to the DALI bus. In addition to addressing, configuration and monitoring, it measures bus vo...

The expander appears as one addressed device on the main DALI line. It forwards incoming commands to the sub-line as broadcasts, so the luminaires ...

The main DALI line address is stored in the Proxy module. The module receives commands at its own address and broadcasts them to all devices on its...

Type: Lunatone 24033444-80 Power supply DALI - 80mADALI PS2 80mA serves as a power source for the DALI bus system. Standard voltage and current lim...

Type: Lunatone 24033444-2 Power supply DALI - 230mAEAN: 9010342010019DALI PS serves as a power supply for the DALI bus system. Standardized voltage...

Type: Lunatone 24033444 Power supply DALI - 250mAEAN: 9010342010002DALI-2 PS serves as a power source for the DALI bus system. Standardized voltage...

Phase dimmer 86458618 with DALI control input (DT4) Leading Edge Dimming (TRIAC dimming) uses current that is turned off when the AC waveform begin...

Phase dimmer 86458619 with DALI control input (DT4) Trailing Edge Dimming uses a current that is cut off when the AC waveform ends just before it c...

DALI dimmer for integrating 230V lights into a DALI system. Universal dimmer in a compact design with 3-25W. From firmware 3.5, an additional opera...

DALI dimmer for integrating 230V lights into a DALI system. Compact design 10-300W. From firmware 3.5, an additional operating mode is available as...

DALI dimmer for integrating 230V lights into a DALI system. Trailing edge control in a compact design with 10-300W. From firmware 3.5, an additiona...

DALI LED dimmer (CV) with one channel, for ceiling cavity. Output is controllable via DALI or Sw&Dim. Input voltage from 12V to 48V DC, max. co...

DALI LED dimmer (CV) with 2 separately controllable channels for the ceiling space. Each channel has its own DALI address. As an alternative to the...