Skip to content
KNXSolution.sk - KNX Future-proof Technology
KnxSolution.sk - KNX Future-proof technology

Mini-PIR-KNX/20 KNX motion sensor with narrow 20° coverage

Original price €116,00 - Original price €116,00
Original price
€116,00
€116,00 - €116,00
Current price €116,00

Creatrol Mini PIR Curtain KNX 20° is a compact motion sensor with a narrow curtain-shaped detection area. It uses passive infrared PIR technology and is designed to monitor movement within a narrow strip of space. It is suitable, for example, for detecting passage through a selected part of a corridor or entrance area where the lateral coverage of the sensor needs to be limited.

The quad-element PIR sensor improves radial movement detection and reduces blind spots. The device includes an illuminance sensor with a range of 0–32 000 lx, allowing lighting control to account for daylight as well. Communication and power are supplied through the KNX TP bus. The sensor is available in white and black, and its cutout diameter of just 35 mm allows discreet integration into the ceiling.

Narrow detection area

The mounting height is 2–3.2 m. The 20° detection angle creates a narrow strip that must be aligned correctly with the monitored space. At a height of 3 m, the detection diagram shows an area measuring approximately 6 × 0.9 m. The longer axis covers a broader section, while the narrow lateral width helps focus detection on the selected line of movement.

This is a PIR motion sensor whose response depends on a heat source moving within the detection area. When used to monitor passage, select a position and orientation that ensure people cross the active zone. Prolonged detection of a completely motionless seated person cannot be regarded as a guaranteed function of this model.

Automation functions

  • Four independent channels for lighting control via KNX.
  • Fully automatic and semi-automatic modes.
  • Master/Slave operation and day/night mode.
  • Easy mode for quick setup and Advanced mode for advanced multi-channel configuration.
  • Built-in logic functions, manual mode and independent event outputs.
  • Dynamic parameter changes via communication objects on the KNX bus.
  • Adjustable delay from 1 to 3 600 seconds.
  • Parameter configuration and status readout using an optional IR remote control.
  • LED indication and a programming button for assigning the physical KNX address.

Mounting and optional accessories

The sensor is primarily designed for recessed ceiling mounting. The visible part has a diameter of 43 mm, the depth is 35 mm and the required cutout diameter is 35 mm. Spring clips secure the sensor. KNX conductors with a diameter of 0.6–0.8 mm connect to the red and black bus terminal.

The mounting surface should be firm, stable and free of vibration. Avoid locations immediately next to air-conditioning outlets, heat sources or areas subject to rapid temperature changes. Pets or moving curtains in the monitored area may cause unwanted triggering. Correct alignment of the narrow detection area is therefore part of both system planning and commissioning.

Optional accessories include the IR remote control RC1 (60.99.00C1), the A55 cover ring, type 86 wall mounting frame, A40 trimless recessed mounting kit, A50 surface mounting housing and a universal mounting bracket. The appropriate mounting kit allows the installation to be adapted to the specific interior.

Technical specifications

  • Technology: Passive infrared PIR sensor, quad-element design
  • Mounting height: 2–3.2 m
  • Detection angle: 20° – curtain-shaped detection area
  • Coverage at a height of 3 m: Approximately 6 × 0.9 m according to the detection diagram
  • Bus and power supply: KNX TP, 21–30 V DC from the bus
  • Current consumption: ≤10 mA
  • Illuminance measurement: 0–32 000 lx, accuracy ±4 %
  • Adjustable delay: 1–3 600 s
  • Dimensions / cutout diameter: Ø43 × 35 mm / Ø35 mm
  • Material / IP rating: PC / IP20
  • Operating conditions: Indoors, −20 to +45 °C; relative humidity < 95 %, non-condensing
  • Storage temperature: −40 to +85 °C
  • Weight: 24.5 g
  • White variant: 60.99.1213 – CTL-SEN-Mini/1213
  • Black variant: 60.9B.1213 – CTL-SEN-Mini/1213B

Documentation

Datasheet and mounting instructions (EN)

Manufacturer information

Estimated delivery time: 10 - 18 days

Planning an order over €5,000?
Request an individual quotation for your project.