Mini-ToF-KNX KNX spot presence sensor
Creatrol Mini ToF KNX is a compact occupancy sensor using optical Time-of-Flight distance measurement. It monitors a specific location within a small detection area and identifies presence, occupancy, approach and departure of the target. By evaluating the distance to an object, it can also detect stationary presence without significant movement. It is suitable for targeted monitoring of a defined point, such as a position at a worktop or a seat, provided the target is in its direct line of sight and within its measurement range.
The recessed design, with a visible diameter of 43 mm and a 35 mm cutout, allows discreet integration into the interior. The sensor communicates via KNX TP, which also supplies its power. Integrated illuminance measurement provides information for lighting automation based on occupancy and daylight. White and black versions are available.
Precise monitoring of a small area
ToF technology uses an infrared source with a wavelength of 940 nm and a refresh rate of 15 or 30 Hz. The distance between the sensor and the monitored target must be 0.1–3.2 m. The recommended mounting height is 2–4 m; for higher installations, the actual distance to the monitored object must therefore be taken into account.
The detection angle is 20° and the detection diagram shows a small area with a diameter of 0.4 m at a height of 3 m. Positioning and alignment must therefore be adapted to the specific point being monitored. The optical path must remain unobstructed. Dark materials may reduce sensitivity, while direct light and reflections can affect evaluation. The sensing surface must be kept clean and free of scratches.
KNX automation functions
- Four independent channels for lighting control via KNX.
- Fully automatic and semi-automatic modes, Master/Slave operation and day/night mode.
- Easy mode for quick setup and Advanced mode for advanced multi-channel configuration.
- Built-in logic functions, manual mode and independent event outputs.
- Dynamic parameter changes via communication objects on the KNX bus.
- Parameter configuration and status readout using an optional IR remote control.
- LED indication and a programming button for assigning the physical KNX address.
Mounting and optional accessories
The standard installation method is recessed ceiling mounting, secured by spring clips. KNX wiring connects to the red and black bus terminal; the suitable conductor diameter is 0.6–0.8 mm. The sensor is intended for indoor use and requires an unobstructed view of the detection area. There should be no moving objects or obstacles near the monitored point that could obscure the target.
Optional accessories include the IR remote control RC1 (60.99.00C1), the A55 cover ring, type 86 wall mounting frame, A40 trimless recessed mounting kit, A50 surface mounting housing and a universal mounting bracket. The appropriate kit allows the mounting arrangement to be adapted to the installation location.
Technical specifications
- Technology: ToF – optical distance measurement
- Light source / laser class: 940 nm / Class 1 according to IEC 60825-1:2014
- Refresh rate: 15 / 30 Hz
- Mounting height: 2–4 m
- Sensor-to-target distance: 0.1–3.2 m
- Detection angle / coverage: 20° / ≤0.4 m; diagram at 3 m: Ø0.4 m
- Bus and power supply: KNX TP, 21–30 V DC from the bus
- Current consumption: ≤10 mA
- Illuminance measurement: 0–32 000 lx, accuracy ±4 %
- Adjustable delay: 1–3 600 s
- Dimensions / cutout diameter: Ø43 × 35 mm / Ø35 mm
- Material / IP rating: PC / IP20
- Operating conditions: Indoors, −20 to +45 °C; relative humidity < 95 %, non-condensing
- Storage temperature: −40 to +85 °C
- Weight: 27 g
- White variant: 60.99.7113 – CTL-SEN-Mini/7113
- Black variant: 60.9B.7113 – CTL-SEN-Mini/7113B
Documentation
Estimated delivery time: 10 - 18 days
Planning an order over €5,000?
Request an individual quotation for your project.