216300 KNX / EIB Fan Coil 8-output
Type: GIRA 216300 KNX / EIB Fan Coil 8-Output
EAN: 4010337059387
Bus System: KNX (TP)
Degree of protection: IP20
Mounting: DIN rail
Product group: heating, air conditioning, ventilation
Product type: Fan Coil
Fan coil drive for controlling fan convectors (fan coil
units) used for room air conditioning. The actuator receives telegrams, for example, from the room temperature controller and adds telegrams with a command value
equivalent fan stages and valve positions. ETS3 or later is recommended for configuration and commissioning of the device. Fan convector connection with up to 6 fan levels resp. connection of two fan convectors, each with up to 3 fan levels for 2-pipe systems. Manual operation for manual operation or on-site operation without bus voltage.
Operating modes for heating, cooling or combined heating / cooling operation
· 2-pipe or 4-pipe operation. The 2-pipe system heats or cools using a common water circuit. The 4-pipe system consists of
separate inlet and return for heating and cooling system.
· Individual or hierarchical switching of feedback fan stages, output display, lock function for each channel, level limit.
It is possible to configure the behavior after a bus voltage failure or a mains voltage failure during the ETS programming process. Adjustable limit values.
Cyclic or event-oriented sending. Free channels can be used to switch functions, such as room lighting.
Changeover contact: µ contact, 1 x potential-free NO contact
Switching capacity AC 230 V: 10 A / AC 1 or 10 A / AC 3
Maximum inrush current: 200 µs: 800 A, 20 ms: 165 A
Connected load
Ohmic load: 2300 W
Capacitive load AC 230 V: 10 A, max. 140 uF
Bulbs: 2300 W
HV halogen bulbs: 2300 W
Wound transformer: 1200 VA
Tronic transformer: 1500 W
Fluorescent lamps, uncompensated: 1000 VA
Fluorescent lamps, two-circuit: 2300 VA
Fluorescent lamps, parallel compensated: 1160 VA
Mercury lamps, uncompensated: 1000 W
Mercury lamps, parallel compensated: 1160 W
Connection: max. 4 mm²
VDE approval according to: EN 60669-1, EN 60669-2-1, EN 50428
Estimated delivery time: 6 - 10 days
Planning an order over €5,000?
Request an individual quotation for your project.