5002028 KNX Push Button Sensor 4.95 Comfort, Double - Anthracite

Type: GIRA 5002028 KNX Push Button Sensor 4.95 Comfort, Double - Anthracite

EAN: 4010337070863

The appropriate set of 2-piece switches for the design line must be ordered separately!!!

Features

Button sensor with integrated bus coupling and the option to connect a wired remote sensor. Work surface made of high-quality genuine material three millimeters thick (glass, stainless steel, aluminum). For each work surface, the rocker or button function can be set. Tactile feedback upon button press.
Functions: Switching, dimming, blinds, value transmitter, scene auxiliary unit, 2-channel operation, and controller auxiliary unit.
Switching: Response to press and/or release, turning on, turning off, toggling.
Dimming: Times for short and long activations, dimming at various levels, repeating telegram in case of long activation, sending stop telegram at the end of activation.
Blind control: Four different control concepts with times for short and long lowering and slat adjustment.
Value transmitter function: Selection of value range, value upon activation.
Scene auxiliary unit: S with or without the save function, triggering internal scenes with or without the save function.
2-channel operation: For each rocker switch or button, the operation of two independent channels can be set. This allows sending up to two telegrams to the bus by pressing a button. Channels can be parameterized independently for switching, value transmission, or scene functions.

Features of the auxiliary regulator unit

The external room temperature regulator can be controlled by the button function of the auxiliary regulator unit. Switching operating modes, forced switching of operating modes, presence function, and setting the target value. Evaluation of the regulator's status using the status LED.

Status LED functions 

Each status LED can be parameterized independently of the workspace.
Status LEDs can light up in red, green, blue, yellow, cyan, orange, purple, or white as needed.
Functions of the status LED: always off, always on, activation display, telegram confirmation, status display, inverted status display, activation via a separate LED object, operational status display, regulator status display, presence status display, and inverted presence status display.
Additionally, a master function can be enabled for each status LED, allowing for the setting of a different color and type of display.

General functions
LED alarm notifications: All LED indicators of the button sensor can flash red simultaneously in case of an alarm notification.
Orientation LED lighting: All LED indicators can be turned off or permanently turned on for orientation, indicating the status of a separate communication object (ON, OFF, flashing) or can light up when the button is pressed and automatically turn off again after a delay time.
LED night time reduction: Control of the brightness of all status LEDs via the communication object. This means that the brightness can be reduced to a value configured in ETS during nighttime hours.
Function to deactivate individual buttons or rockers.
Scene function: Internal storage of up to eight scenes with eight output channels.
Temperature measurement: Measurement of room temperature using internal sensors, internal and wired remote sensors, or internal and external sensors.
Room humidity measurement: Measurement of room humidity using internal sensors.
Security during disassembly.
Rockery can be customized through the Gira Inscription Service.
Rocker sets with a thickness of up to 3 mm of real material available separately.
KNX Data Secure from 12/2022.
Firmware can be updated using the Gira ETS Service App (additional software).

Technical data
KNX medium: TP256
KNX connection: Connection and terminal block
Protection class: III
Installation depth: 16 mm
Keypad: 95 x 95 mm
Ambient temperature: -5 °C to +45 °C

Notes
The connection terminal for KNX is included in the delivery.

Link to manufacturer information