879-3001 Modbus / M-Bus three-phase energy meter 65 A MID/METAS 4PU
Wago 879-3001 is a three-phase energy meter for direct measurement up to 65 A in 3 × 230/400 V AC networks. It measures imported and exported active and reactive energy and provides readings for voltage, current, power and mains frequency. It is suitable for monitoring consumption in buildings, equipment and individual electrical circuits, as well as energy flows in installations with local generation.
Integrated Modbus RTU over RS-485 and M-Bus interfaces allow connection to a building management or energy management system. Readings are also clearly displayed on the large backlit LCD. The meter is just 72 mm wide, and its Push-in CAGE CLAMP terminals with levers simplify wiring inside the distribution board.
Measurement, tariffs and communication
- Direct measurement up to 65 A: no external current transformers required.
- Bidirectional measurement: separate recording of imported and exported active and reactive energy.
- Instantaneous electrical values: voltage and current per phase, active, reactive and apparent power, power factor and frequency.
- Four tariffs: a 230 V AC input switches T1/T2; T3/T4 can be selected using the controls or via Bluetooth, Modbus or M-Bus.
- Two configurable S0 pulse outputs: transfer energy readings to a compatible counter or control system.
- Local and wireless configuration: touch-sensitive controls and the WAGO Energy Meter Configurator app via Bluetooth.
- Powered from the measurement circuit: the meter itself requires no separate auxiliary power supply.
4PU design and certification
The 4PU design has both the incoming and outgoing phase terminals on the bottom of the meter. This arrangement accommodates power cables routed from the same side of the device.
Model 879-3001 is MID and METAS certified. Active energy is measured to accuracy class B according to EN 50470-3.
Technical data
- Measurement: direct, three-phase; two-wire and three-wire networks are also supported as shown in the wiring diagrams
- Rated voltage: 3 × 230/400 V AC, ±20 % tolerance
- Reference / maximum current: 5 A / 65 A
- Frequency: 50 Hz nominal, 45–60 Hz operating range
- Communication: Modbus RTU, two-wire RS-485; M-Bus; Bluetooth
- Modbus RTU: 1,200–115,200 baud, configurable address 1–247
- M-Bus: 300–9,600 baud, EN 13757-3
- Input: 1 × 230 V AC tariff input
- Outputs: 2 × configurable S0 pulse output
- Display: backlit LCD
- Mounting: 35 mm DIN rail, 4 modules wide
- Dimensions (W × H × D): 72 × 140 × 63 mm; height without covers 92 mm
- Protection rating: IP51 at the front, IP20 at the connections
- Protection class: II
- Operating temperature: −40 to +70 °C; permissible current depends on temperature and conductor cross-section
- Housing material: PC 940A polycarbonate
Connection and installation
The power terminals accept solid conductors of 0.75–16 mm², fine-stranded conductors of 0.75–25 mm² and fine-stranded conductors with ferrules of 0.75–16 mm². The communication and tariff terminals accept conductors of 0.2–4 mm², or 0.25–2.5 mm² with insulated ferrules. When planning the wiring, observe the current and temperature limits for the selected conductor cross-section given in the manual.
Estimated delivery time: 6–10 days
Planning an order over €5,000?
Request an individual quotation for your project.