Mini-DTP-KNX KNX presence sensor PIR + 24 GHz radar
Creatrol Mini-DTP-KNX is a ceiling-mounted KNX presence sensor combining a passive infrared PIR sensor and 24 GHz FMCW radar. PIR detects motion through changes in infrared radiation, while the radar detects motion, minor movements and stationary presence. Combined evaluation of both technologies helps reduce unwanted activations.
The sensor is also suitable for spaces where people remain seated for extended periods without significant movement, such as offices, meeting rooms and living spaces. Radar detection also captures small body movements caused by breathing. The combined sensor uses both technologies to verify detected stimuli.
Integrated illuminance measurement over a range of 0–32 000 lx supplements presence information with the current ambient light level. The sensor provides four independent channels for lighting control via KNX and offers modes for both simple and advanced applications. It is powered directly from the KNX bus at 21–30 V DC, without a separate auxiliary power supply.
Combined detection and room coverage
At a mounting height of 3 m, the motion detection area has a diameter of Ø 8 m and the stationary presence detection area has a diameter of Ø 6 m. When positioning sensors above desks and seating areas, the stationary presence area must be taken into account. The recommended mounting height is 2–3.2 m.
Sensitivity and detection distance are adjusted independently. The combination of PIR and radar reduces the risk of false activations, but does not replace correct sensor positioning and configuration for the specific room. The KNX application and group addresses are configured in ETS.
KNX automation functions
- 4 independent channels for lighting control via KNX.
- Fully automatic and semi-automatic operation.
- Master/Slave and day/night modes.
- Easy mode for simple setup and Advanced mode for extended multi-channel applications.
- Integrated logic functions, manual mode and independent event outputs.
- Parameters can be changed via communication objects on the KNX bus.
- Independent adjustment of sensitivity and detection distance.
- Parameter configuration and status readout using the optional RC1 IR remote control.
The four control channels process and transmit commands within the KNX installation. They are not four separate spatial detection zones or four power outputs for directly connecting luminaires.
Technical specifications
- Communication: KNX TP
- Detection technology: PIR + 24 GHz FMCW radar
- Power supply: 21–30 V DC from the KNX bus
- Current consumption: ≤ 10 mA
- Mounting: Recessed ceiling mounting
- Mounting height: 2–3.2 m
- Detection angle: 360°
- Motion detection area at a height of 3 m: Ø 8 m
- Stationary presence detection area at a height of 3 m: Ø 6 m
- Sensor-to-target detection distance: 1.5–8 m
- Adjustable sensitivity: 0–100 %
- Illuminance measurement: 0–32 000 lx; accuracy ±4 %
- Adjustable delay: 1–3 600 s
- Number of lighting control channels: 4
- Radar operating frequency: 24.00–24.25 GHz
- Transmit power: ≤ 10 dBm
- Indication: LED
- Dimensions: Ø 43 × 35 mm
- Cutout diameter: Ø 35 mm
- Sensor weight: 26.5 g
- Housing material: PC
- IP rating: IP20
- Operating temperature: −20 to +45 °C, indoor use
- Relative humidity: < 95 %, non-condensing
- Storage temperature: −40 to +85 °C
- KNX connection: Red/black bus terminal; conductor Ø 0.6–0.8 mm
- Programming button: For assigning the physical address
Mounting and positioning
The sensor is designed for recessed ceiling mounting with a Ø 35 mm cutout. The visible diameter is 43 mm and the body depth is 35 mm. Spring clips facilitate fixing within the cutout. Optional mounting adapters are available for surface, wall or other mounting arrangements.
When selecting the location, bear in mind that radar signals can penetrate non-metallic materials. Movement behind a lightweight partition or suspended ceiling can therefore affect detection. Do not position the sensor near constantly moving curtains or plants, or near large reflective surfaces such as mirrors and metal ventilation ducts. The mounting surface must be free of vibration. Maintain a distance of at least 4 m between these sensors when installing more than one.
Colour variants
- White: 60.99.3113 / CTL-SEN-Mini/3113.
- Black: 60.9B.3113 / CTL-SEN-Mini/3113B.
Optional accessories
- RC1 – IR remote control, order code 60.99.00C1.
- Cover ring – 60.99.0A55.
- Type 86 wall mounting frame – 60.99.0A86.
- Trimless recessed mounting adapter – 60.99.0A40.
- Surface mounting base – 60.99.0A50.
- Universal mounting bracket.
The listed accessories are selected separately according to the mounting method and required control options.
Documentation
Estimated delivery time: 10 - 18 days
Planning an order over €5,000?
Request an individual quotation for your project.