Skip to content
KNXSolution.sk - KNX Future-proof Technology
KnxSolution.sk - KNX Future-proof technology

Mini-PIR-DALI/STD/20 DALI Bus Access PIR motion sensor 20°

Original price €116,00 - Original price €116,00
Original price
€116,00
€116,00 - €116,00
Current price €116,00

Creatrol Mini-PIR-DALI/STD/20 is a miniature ceiling-mounted motion sensor with a narrow detection area for DALI systems. It uses passive infrared PIR technology and a Fresnel lens to detect human movement within a defined part of the space. The narrow curtain-shaped coverage allows monitoring of an entrance, passage or section of a corridor without covering the entire room.

This is the DALI Bus Access / STD version, powered directly from the DALI bus at 9–22 V DC. The sensor combines motion detection with measurement of ambient illuminance over a range of 0–32 000 lx. The measured data serve as inputs to a compatible DALI control system, which provides the required lighting logic. Support for this sensor in the selected DALI controller must be verified during system planning. These functions allow lighting automation to take movement and available daylight into account. The small body with a Ø 35 mm cutout is suitable for residential and commercial interiors requiring discreet installation.

Narrow detection area for entrances and passages

The detection angle is 20° in the narrow direction. When mounted on the ceiling at a height of 3 m, it creates an area up to 6 m long and approximately 0.9 m wide. The sensor can therefore be aligned with a specific passage, entrance line or narrow section of a walkway. Correct alignment of the detection area using the orientation mark on the sensor is important during planning.

PIR detection responds to movement within the sensing area. The sensor is particularly suitable for people passing through a defined space; detecting people sitting quietly requires a suitable technology for stationary presence detection.

Functions and configuration

  • Motion detection using a PIR sensor with narrow coverage.
  • DALI communication according to IEC 62386-103.
  • Integrated illuminance measurement from 0–32 000 lx.
  • Adjustable light threshold.
  • Adjustable delay from 1 to 3 600 seconds.
  • Configuration using DALI-Config software or an optional IR remote control.
  • Status readout and configuration of supported parameters using the IR remote control.
  • The indicator LED brightness automatically adapts to ambient light.

Technical specifications

  • Communication: DALI, IEC 62386-103
  • Version: Bus Access / STD
  • Detection technology: Passive infrared PIR sensor
  • Power supply: 9–22 V DC from the DALI bus
  • Power consumption: Max. 0.5 W
  • Address range: 00–63 (decimal)
  • Mounting: Recessed ceiling mounting
  • Mounting height: 2–3.2 m
  • Detection angle: Narrow 20° coverage
  • Detection area at a height of 3 m: Length up to 6 m, width approximately 0.9 m
  • Illuminance measurement: 0–32 000 lx; accuracy ±4 %
  • Adjustable delay: 1–3 600 s
  • Indication: LED with automatic brightness adjustment
  • Dimensions: Ø 43 × 25 mm
  • Cutout diameter: Ø 35 mm
  • Sensor weight: 14.5 g
  • Connecting cable: UL1007 22 AWG, length 150 mm
  • Housing material: PC
  • IP rating: IP20
  • Operating temperature: −20 to +45 °C, indoor use
  • Relative humidity: < 95 %, non-condensing
  • Storage temperature: −40 to +85 °C

Mounting and positioning

The sensor is designed for recessed ceiling mounting at a height of 2–3.2 m. The body has an outer diameter of 43 mm and a depth of 25 mm, and the required cutout diameter is 35 mm. Spring clips secure it within the cutout. Optional adapters extend the options to surface or wall mounting.

The mounting surface must be stable and free of vibration. Do not position the sensor near heat sources, air-conditioning outlets or areas subject to rapid temperature changes. Pets or curtains moving within the detection area may cause an unwanted response. DALI communication and power use the same bus connection, wired according to the diagram in the datasheet.

Colour variants

  • White: 60.99.1215 / CTL-SEN-Mini/1215.
  • Black: 60.9B.1215 / CTL-SEN-Mini/1215B.

Optional accessories

  • RC1 – IR remote control, 60.99.00C1.
  • Cover ring, 60.99.0A55.
  • Type 86 wall mounting frame, 60.99.0A86.
  • Trimless recessed mounting adapter, 60.99.0A40.
  • Surface mounting base, 60.99.0A50.
  • Universal mounting bracket.

Accessories are selected separately according to the required mounting and configuration method.

Documentation

Mini-PIR-DALI/STD/20 datasheet (PDF, EN)

Manufacturer information

Estimated delivery time: 10 - 18 days

Planning an order over €5,000?
Request an individual quotation for your project.