Kamstrup MULTICAL 603 – KNX Secure heat and cooling meter
Kamstrup MULTICAL 603 ultrasonic heat and cooling meter in a Lingg & Janke kit with an integrated KNX Secure interface. Enables measured energy data to be transferred to the KNX system. Also supports KNX Standard and KNX quick.
- Ultrasonic flow measurement, accuracy class 2.
- Two temperature sensors with 1.5 m cables.
- Up to Qp 6 m³/h: short direct sensors including mounting adapters; from Qp 10 m³/h: pocket sensors including sensor pockets.
- The KNX interface and verification fee are included in the kit.
The calculator can be installed separately from the flow meter; a wall bracket is included.
Installation and accessories
Requires a 230 V power supply and connection to the KNX bus. Battery operation with the supplied KNX interface is not permitted. Connection fittings must match the thread or flange of the selected variant. Follow the manual and meter markings for the installation position and sensor locations.
For versions 110 mm/G3/4, 130 mm/G1, 190 mm/G1 and 260 mm/G1 1/4, the following are available: KUG-SET mounting kits. Use them only with matching dimensions and direct sensors of 5.0–5.2 mm/M10. For separate installation of such a sensor, the following is available: KUG-MW valve. An additional mounting kit may not be required at an existing compatible metering point.
For variants where the table does not specify DN or installation length, have this dimension confirmed before ordering.
Variants
| Order code | Version |
|---|---|
| 84821 SEC | Qp 0,6 m³/h; DN15; 110 mm; G3/4 |
| 84822 SEC | Qp 0,6 m³/h; DN20; 130 mm; G1 |
| 84823 SEC | Qp 1,5 m³/h; DN15; 110 mm; G3/4 |
| 84824 SEC | Qp 1,5 m³/h; DN20; 165 mm; G1 |
| 84825 SEC | Qp 1,5 m³/h; DN20; 130 mm; G1 |
| 84826 SEC | Qp 1,5 m³/h; DN20; 190 mm; G1 |
| 84828 SEC | Qp 2,5 m³/h; DN20; 190 mm; G1 |
| 84829 SEC | Qp 3,5 m³/h; DN25; 260 mm; G1 1/4 |
| 84830 SEC | Qp 6 m³/h; DN25; 260 mm; G1 1/4 |
| 84831 SEC | Qp 10 m³/h; DN40; 300 mm; G2 |
| 84832 SEC | Qp 15 m³/h; DN50; 270 mm; flange |
| 84833 SEC | Qp 25 m³/h; DN65; 300 mm; flange |
| 84834 SEC | Qp 40 m³/h; DN80; 300 mm; flange |
| 84835 SEC | Qp 60 m³/h; DN100; 360 mm; flange |
| 84836 SEC | Qp 100 m³/h; DN100; 360 mm; flange |
| 84837 SEC | Qp 100 m³/h; DN125; flange |
Image for illustration only. It shows a representative version; appearance, dimensions, connections and supplied components may vary depending on the selected variant.
Estimated delivery time: 8 - 16 days
Planning an order over €5,000?
Request an individual quotation for your project.
