Kamstrup MULTICAL 603 Solar – KNX Secure heat meter
Heat meter for solar circuits in a Lingg & Janke kit. MULTICAL 603 calculator with a solar pulse flow sensor suitable for glycol and an integrated KNX Secure, KNX Standard and KNX quick interface.
The correction value is fixed and cannot be adjusted by the user. Before ordering, check that the configuration is suitable for the specific fluid and glycol concentration. Temperature range 0 to 120 °C, horizontal installation. The verification fee is included in the price.
Installation and accessories
Requires a 230 V power supply and connection to the KNX bus. Battery operation with the supplied KNX interface is not permitted. Connection fittings must match the thread or flange of the selected variant. Follow the manual and meter markings for the installation position and sensor locations.
For versions 110 mm/G3/4, 130 mm/G1, 190 mm/G1 and 260 mm/G1 1/4, the following are available: KUG-SET mounting kits. Use them only with matching dimensions and direct sensors of 5.0–5.2 mm/M10. For separate installation of such a sensor, the following is available: KUG-MW valve. An additional mounting kit may not be required at an existing compatible metering point.
The photograph shows the MULTICAL 603 calculator, not the complete solar metering kit.
Variants
| Order code | Version |
|---|---|
| 84416 SEC | Qp 1,5 m³/h; DN15; 165 mm; G3/4 |
| 84417 SEC | Qp 2,5 m³/h; DN20; 190 mm; G1 |
| 84418 SEC | Qp 3,5 m³/h; DN25; 260 mm; G1 1/4 |
| 84419 SEC | Qp 6 m³/h; DN25; 260 mm; G1 1/4 |
Image for illustration only. It shows a representative version; appearance, dimensions, connections and supplied components may vary depending on the selected variant.
Estimated delivery time: 8 - 16 days
Planning an order over €5,000?
Request an individual quotation for your project.
