MTN632519 KNX ARGUS 220 motion sensor

Schneider Electric MTN632519 KNX ARGUS 220 motion sensor - polar white

EAN: 3606485104881

KNX motion detector for outdoor use. 220° surface monitoring for large house facades and parts of the house. S integrated bus coupler. Physical address is programmed with a magnet. 360° short-range zone (radius approx. 4 m). 

The control elements are protected under an easily accessible cover plate. Flexible adjustment of the sensor head. Possibility of covering individual lens areas. Possibility of installation on walls and ceilings without additional accessories. Possibility of mounting on internal/external corners and fixed pipes using the mounting bracket.

Normal operation, master, slave, safety pause, deactivation function. Sensitivity, brightness and staircase timer can be adjusted via ETS or potentiometer. Self-adjusting staircase timer.

KNX software functions
Five motion blocks: up to four functions can be triggered per block.
Telegrams: 1 bit, 1 byte, 2 bytes.
Detection angle: 220°.
Range: max. 16 m.
Number of levels: 7.
Number of zones: 112 with 448 switching segments.
Light sensor: continuously adjustable from approx. 3 to 1000 lux (infinite number of lux: motion detection is independent of the position of the sensor head).
Time: adjustable externally from 1 s to approx. 8 min. in 6 levels or via ETS from approx. 3 s to approx. 152 hours.
Sensitivity: continuously adjustable.
Possible sensor head settings: Wall mounting: 9° up, 24° down, 12° left/right, ±12° axial. Ceiling mounting: 4° up, 29° down, 25° left/right, ±8.5° axial.
Protection: IP 55.
Contents: S cover plate and segments to limit the detection area, screws and dowels.

Link to manufacturer information