Skip to content
KNXSolution.sk - KNX Future-proof Technology
KnxSolution.sk - KNX Future-proof technology

KNX wall clock Ø 230–400 mm with a sweeping second hand

Original price €601,00 - Original price €624,00
Original price
€601,00
€601,00 - €624,00
Current price €601,00

Westerstrand KNX wall clock Ø 230–400 mm with a sweeping second hand is an indoor analogue clock for displaying a consistent time throughout a KNX installation. It displays hours, minutes and seconds; the red second hand moves smoothly around the dial. The clock receives the time from the bus and automatically adjusts the hand positions accordingly. It is suitable for offices, schools, healthcare facilities, entrance halls and other spaces where multiple clocks need to show the same time.

The single-sided design is intended for wall mounting. The ABS plastic housing is complemented by a matt white dial with black numerals or hour markers and flat protective glass. A choice of diameter, dial design and frame colour allows the clock to be matched to the interior.

Power supply and synchronisation via KNX

The clock uses the same two-wire connection for power and communication. It is powered directly from the KNX bus and requires neither batteries nor a separate mains adapter. When sizing the bus power supply, allow for a current consumption of 30 mA per clock.

Synchronisation requires a source of time telegrams in DPT 10.001 or DPT 19.001. If the installation already sends the time in either of these formats, a separate master clock is not required. The Westerstrand WDP-Q KNX can be used as a separate time source. The clock follows changes between summer and winter time through the time received from the bus.

Commissioning and synchronisation monitoring

After the bus is connected or the configuration is downloaded, the hands move to 12:00. Once a valid time telegram is received, they move to the correct time. Configuration is carried out in ETS; the programming button, LED and red/black bus terminal are on the rear.

  • Time request at start-up: optional transmission of a request, which the time source must be configured to answer.
  • Synchronisation monitoring: adjustable interval for expecting time telegrams from 3–1 445 minutes.
  • Loss-of-synchronisation alarm: optional message on the KNX bus; the alarm is cleared when reception of the time resumes.
  • Behaviour on loss of synchronisation: continue using the internal clock or return the hands to 12:00. This function applies when time telegrams are lost while the bus remains powered.

Choice of versions

  • Diameter: Ø 230 mm, Ø 300 mm or Ø 400 mm.
  • Dial A: black Arabic numerals 1–12 on a white background.
  • Dial H: black hour markers on a white background.
  • Frame colour: grey or white. The colour selection applies to the frame; the standard dial is white in both cases.

Technical specifications

  • Display: hours, minutes and seconds
  • Hands: Black hour and minute hands, red sweeping second hand
  • Power supply: SELV 29 V DC from the KNX bus
  • Bus current consumption: 30 mA
  • Housing material: ABS plastic
  • Front cover: flat protective glass
  • IP rating: IP20
  • Operating temperature: 0 to +40 °C
  • Relative humidity: 0–95 %, non-condensing
  • Mounting: single-sided, for indoor wall mounting
  • Weight by diameter: Ø 230 mm: 0.8 kg; Ø 300 mm: 1.1 kg; Ø 400 mm: 1.8 kg

Coloured dials to order

Coloured dials are available to individual order. To select a colour, obtain a quotation and confirm the lead time, please contact us. The photograph of coloured clocks illustrates the available possibilities and does not represent the standard version of the selected variant.

Documentation

Manufacturer information

Estimated delivery time: 10 - 18 days

Planning an order over €5,000?
Request an individual quotation for your project.